1CH MINI 3G/HD/SD/DVB-ASI SDI Fiber With LOOP 20-100KM(3G-SDI-N-20KM-TX/RX)

1. Description
This 3G SDI TX&RX BOX are fiber optic
serial digital video transmission units that offer the industry’s broadest
range of digital rates 3Gbps bandwidth while maintaining the signal quality
that broadcasters demand.
The transmitter
accepts a 75ohm BNC input and converts it into an optical stream via a standard
ST connector and local 75ohm BNC out.
The transmitter
BNC include equalization and reclocker for long lengths of coaxial cable, so
you can use them at nearly any point in your SDI chain.
The receiver unit
reconverts the uncompressed signal back to two BNCs output.
Both the
transmitter and receiver modules include LED indicators to display Power On,
SDI signal presence and optical fiber presence. The units use +5 TO 30V power supply
2. Feature
Not Support Video Pathological Test Code Complian
Supports SMPTE 424M, SMPTE 292M, and SMPTE 259M (C) Serial Digital Video Standards
Supports 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, and 2.97 Gbps Serial Data Rate Operation
Supports DVB-ASI at 270 Mbps
Input Cable Equalization 3G:100m, HD-SDI:150m SD-SDI:300m@Belden 1694A
Output Cable Reach 3G:100m, HD-SDI:150m SD-SDI:300m@Belden 1694A
Supports embedded audio
Support SDI IN and OUT Video Resolutions as followed:
SD:
525i @59.94Hz
;
625i @50Hz
HD: [email protected] &24Hz &25Hz &29.97Hz &30Hz &50Hz
&59.94Hz &60Hz
;
1080p@
720p&23.98Hz
&24Hz &25Hz &29.97Hz &30Hz
1080sf@
720p&23.98Hz
&24Hz &25Hz &29.97Hz &30Hz
1080i@
50Hz
&59.94Hz&60Hz
1035i@
50Hz
&59.94Hz&60Hz
3G:
1080p@50Hz
&
&59.94Hz &60Hz
;
SDI Loop Out on the transmitter side
SDI Loop Out on the Receiver side
75ohm BNC input and output port
ST Fiber Receptacle
Up to 20km distance @ Singlemode Fiber default
Maximum distance up to 100 km@ Singlemode Fiber
+5 TO 30V DC power supply
3. Specifications
Description
Parameter
Test Conditions
BNC
SMPTE Standard
Not support Video Pathological
Test Code Compliant
TK WFM2300
BNC
75 OHM
Agilent System
Date Rate
270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967
Gbps, and 2.97 Gbps
TK WFM2300
Standart
SMPTE 424M, SMPTE
292M, and SMPTE 259M (C) ,DVB-ASI
TK WFM2300
Cable Equalization
3G:100m,
HD-SDI:150m SD-SDI:300m
Belden 1694A
Cable Out Reach
3G:100m, HD-SDI:150m
SD-SDI:300m
Belden 1694A
Jitter
<0.2UI
2.97 Gbps
Eye Overshoot
Amplitude<10%
2.97 Gbps
Rise/Fall time
130-800ps
SD,HD,3G Signal
Fiber
SFP Bandwidth
3Gbps
Agilent System
SFP Support
1310, 1490, 1550
Normal Band and CWDM Band 1270-1610nm
Fiber Receptacle
ST Port
Fiber Distance
20km Default
Singlemode@G652D
Maxmium Fiber Distance
100km
Singlemode@G652D@Long Wave Band
Fiber Type
Singlemode
Others
Input Power
5V TO 30V DC
Power Consumption
1.5W
Power Surge Protect
YES
Operating Temp.
-20 to 60
Storage Temp.
-40 to 85
Operating Humidity
20-80%
Weight
0.5Kg
Dimmension
120*55*22mm
Warranty
3 Years Free Warranty
4. Package List
3G SDI Transmitter*1
3G SDI Receiver*1
Power Adapter*2
5. Installation
Connect the provided DC power supplies to
the power socket of the transmitter and receiver
Connect SDI cable between the SDI video
source and the transmitter BNC input
Connect SDI cable between the receiver BNC
output and the SDI video monitor or SDI DVR
Connect ST fiber between the transmitter
and the receiver ST Receptacle
6. Notes
A. No video output and some one of the
three LEDs not lighted
Please check the power supply if work
please check the video source if work
please check the coaxial cable BNCs if all
tightened well
please check the ST fiber if inserted well
B. There is video display, but video flash
please check the video source format if
right
please check the coaxial cable BNCs if all
tightened well
please check the ST fiber if inserted well
this issue happens often when the ST end
face is dirty
For long range application, please check
the fiber transfer link-budget, if it is too long, the received optical signal
is very weak, and may be out of receiver reclocker capacity and fail to recover
the useful signals
7. Warranty
Thank you very much for using our products
The warranty time is three
years and life-long maintenance. During this period, any belongs to under
normal usage circumstance cause because of the product quality’s problem of
breakdown, our company will be responsible for giving free maintain
Free maintain won’t be given under the
following circumstance:
The malfunction and damaged caused by
incorrect use, the unauthorized repairs and alteration
The damage caused by fire, flood, abnormal
voltage, other natural disasters and secondary product damage
The product malfunction caused by not in
accordance with the user manual operation
The malfunction and damaged caused by the
other barriers(man-made factors or external device)